Briquetting Press

BREQUETTING PRESS (Biomass Plant - Briquetting Machine)

Briquetting Press

The Briquetting machine is a crank type mechanical press with two flywheels. One flywheel is driven by the main motor through a continuous flat belt. Forced lubrication oil circulating system guarantees a long service life. Ground material is fed through a hopper by means of a vertical screw with its own gearbox and motor. The vertical screw forced the material downwards into the feeding chamber. From feeding chamber the material is forced by the ram through a tapered die system on the cooling line in the form of briquettes. Cooling line conducts the briquette away to storing area. The total operation is controlled from the electrical control.

Salient features

Stress relieved and precision board body
Hardened alloy steel crankshaft and crosshead
Forced lubrication
Tight geometric tolerances, longer life for moving components and bearings.
Smaller clearance between wear ring and the ram tip. Longer life of wear tools.
Water cooling of head stock for round the clock working
Easier die holder mounting and clearing of clogged die holder.
Balanced crankshaft assembly.

Profile of a typical Briquetting plant

Model	GK60L	GK 60H	GK 70	GK 90	GK110
Type	Alloy Crank Shaft	Alloy Crank Shaft	Alloy Crank Shaft	Alloy Crank Shaft	Alloy Crank Shaft
RPM	215	215	215	215	215
Stroke	165 mm	190 mm	190 mm	210 mm	220 mm
Total Power Requirement	58 HP with Hammer Mill	70 HP with Hammer Mill	65 HP	88 HP	105 HP
Production Capacity (+ 20 % depending on density and quality of raw material )	500 Kg / Per Hour	700 Kg / Per Hour	1000 Kg / Per Hour	1500 Kg / Per Hour	2000 Kg / Per Hour
Finished Product size	60 MM DIA	60 MM DIA	70 MM DIA	90 MM DIA	110 MM DIA
Finished product shape	Cylindrical	Cylindrical	Cylindrical	Cylindrical	Cylindrical
Finished product length	4” to 6 “	5” to 7 “	6” to 8 “	6” to 10 “	6” to 12 “
Raw Material form	Up to 6 mm size can be used directly	Up to 6 mm size can be used directly	UP to 15 mm size can be used directly	UP to 20 mm size can be used directly	UP to 22 mm size can be used directly
Process Cost	Rs. 650/- per MT	Rs. 600/- per MT	Rs. 450/- per MT	Rs. 400/- per MT	Rs. 400/- per MT